Beachcomber 550X Specifications download pdf (Page 36)

5 - 4 Programmable Control Instructions/Digital 3000

Panel Lock

Press the pad, the emply space between

“warm” and “light” pads, then the pad within 3

seconds. When locked, the display will show the

temperature you have chosen along with the “lock”

symbol. To unlock, press the pad, the empty

space between “warm” and “light” pads, then the

pad within 2 seconds. The lock symbol will

disappear and all panel pads will work again.

On hot tubs with turbo option: Press,

within 3 seconds. When locked, the display

will show the temperature you have chosen along

with the “lock” symbol. To unlock, press the

pads within 2 seconds. The lock

symbolw ill disappear and all panel pads will work

again.

Temperature Lock

Press or then press the the empty

space between “warm” and “light” pads, then the

pad within 3 seconds. when locked, the

display will show the temperature you have chosen

along with the “lock” symbol if or

is pressed. To unlock, press the pad, the

empty space between “warm and light” pads, then

the pad within 2 seconds. The lock symbol

will disappear and all panel pads will work again.

On hot tubs with turbo option: Press or

then the pad within 3 seconds.

When locked, the display will show the temperature

you have chosen along with the “lock” symbol. To

unlock, press the pads within 2

seconds. the lock symbol will disappear and all

panel pads will work again.

Standby Mode

Press or then within 3 seconds to

prevent the hot tub from operating at any time.

Standby mode should be used when replacing the

filter. All hot tub functions will be disabled except for

freeze control. Press any button to resume spa

operation.

DISPLAY MESSAGES

DISPLAY FLASHES “OH”.

“Overheat” - The hot tub has shut down. Either the

water has reached 112

F./44

C, or the high limit

sensor has detected 118˚ F/48

C at the heater.

DO NOT ENTER THE WATER. Remove the hot tub

cover and allow water to cool. At 110˚F/43

C, the hot

tub should automatically reset. If the hot tub does

not reset, then turn off all power to the hot tub and

contact your dealer or service organization.

DISPLAY FLASHES “FLO”.

“Flow” (Flashing) - Flow of water is inhibited.

Check and open flow valves. Check for correct

water level. Clean filter.

DISPLAY FLASHES “FLO”.

“Flow” (Not flashing) - A pressure switch has

manfunctioned.

Contact dealer or service organization.

DISPLAY FLASHES “COOL”.

“Cool” - Water temperature is more than 20

F/7

below the temperature you last set.

No action required. Spa is functioning properly.

DISPLAY FLASHES “ICE”.

“Ice” - Potential freeze condition is detected.

No action required. Pump(s) will automatically

activate regardless of hot tub’s status.

DISPLAY FLASHES “Sn1”.

“Sensor1” - Hot tub is shut down. Hi-limit sensor is

not working.

Contact your dealer or service organization.

DISPLAY FLASHES “Sn3”.

“Sensor 3” - Hot tub is shut down. Water

temperature sensor is not working.

Contact your dealer or service organization.

DISPLAY FLASHES “Stby”

“Standby” - Hot tub is in standby mode. All hot tub

functions are disabled except for freeze control.

Press any button to resume operation.

WARNING! SHOCK HAZARD! NO USER

SERVICEABLE PARTS.

Do not attempt service of this control. Contact your

dealer or service organization for assistance. Follow

all owner's manual power connection instructions.

Installation must be performed by a certified

electrician and all grounding connections must be

properly installed.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 67 68

Comments to this Manuals

No comments

Electrolux EUF3101 Manual de usuario (13 paginas)

Marca: Electrolux | Categoria: Fridges | Tamaño: 0.46 MB |

Tabla de contenidos

GEBRAUCHSANWEISUNG

NOTICE D’UTILISATION

ISTRUZIONI D’USO

INSTRUCTION BOOKLET

Safety instructions

Contents

Description of the Appliance

Before use

Using the freezer

Switching off

Alarms and other features

Freezing

Cabinet interior

Hints and Tips

Maintenance and Cleaning

Something Not Working

Electrolux 818 33 90-01/5

Technical specification

Installation

Installing the cabinet

Door Reversal

Electrical connection

MARIESTAD DT--AV